Window Alarm with Chime (or Door Alarm) Features
- Low Cost Window or Door Alarm
- Alarm and Chime Function
- Simple to install - Adhesive pads
- Batteries supplied and fitted.
- 120dB+ Alarm output
- May not look eaxtly like image
Window Alarm with Chime (or Door Alarm) Description
The Magnetic Window Contact Alarm provides window and door perimeter security and is activated immediately once the contact is broken.
The unit can easily be switched to a welcome or warning chime which will sound three times if the contact is broken.
Dimensions: Just 6 x 3 x 2cms (excluding the magnet)
An ideal weapon against bogus callers.
GAP BETWEEN ALARM AND MAGNETIC SENSOR
The Alarm is activated when switched to Alarm mode and gap between alarm and magnetic sensor is greater than 1.75cm.
BATTERY INSTALLATION
The Magnetic Window Alarm requires (4) LR44 button batteries (included). Average battery life for typical usage is 1 year.
1. Slide cover off the battery compartment located on the front of the main unit.
2. Insert (4) LR44 button batteries noting polarity.
3. Replace battery compartment cover.
INSTALLATION
1. Using the double sided adhesive tape provided, mount the alarm and magnetic sensor on window, door, or cabinet to be protected.
2. Placing one of the units on the part of the fixture that opens (window) and the other unit on the stationary part of the fixture (frame). Mount so that when the window, door or cabinet is closed, the gap between the alarm and sensor is no more than 1.5cm (preferably less).
OPERATION
1. To arm the unit, toggle ALARM/CHIME switch on the side of the main unit to the Alarm or Chime position. Whenever the protected window, door or cabinet is opened (causing the alarm to be separated from the magnetic sensor by more than 1.75cm), the alarm siren will sound continuously until disarmed. If in CHIME mode, the chime will sound 3 times.
2. To disarm the unit, again toggle ALARM/CHIME switch to OFF position. Make sure the window, door or cabinet is closed before re-arming.
NOTE: To test, a cloth can be used to cover the alarm to reduce risk or hearing damage.
CARE AND MAINTAINANCE
To clean the unit housing, use a soft cloth slightly dampened with water and wipe dry. Do not use chemical agents as this may damage and discolour the unit.
Click here for more Window Alarms
Click here for our range of Window Locks
People who bought this product were also interested in :
Glass Guard Window Alarm
Battery Operated magnetic Door/Window Alarm
|
